| Description | Ranunculus inundatus is a creeping plant that can be used in the foreground as well as background. A nutrient rich substrate, water column nutrient dosing, adequate lights and CO2 injection will bring the best out of this plant.
MORE INFORMATION:
| Plant Difficulty |
- Medium |
| Light Requirement |
- Bright |
| Plant Type |
- Stem |
| A very hard to grow fern. Can be attached to wood or rock. Does not demand high light but prefers CO2 and nutrients and soft water
MORE INFORMATION:
| Plant Difficulty |
- Difficult |
| Light Requirement |
- Low |
| Plant Type |
- Rhizome |
| Very bright light, CO2 and adequate nutrients are required for this plant to grow as a carpet.
MORE INFORMATION:
| Plant Difficulty |
- Medium |
| Light Requirement |
- Very Bright |
| Plant Type |
- Stem |
| A small very slow growing plant which can be used in foreground and midground.
MORE INFORMATION:
| Plant Difficulty |
- Easy |
| Light Requirement |
- Medium |
| Plant Type |
- Rosette |
| Dwarf form of Alternanthera reineckii that grows low. Suitable for dutch and nano tanks.
MORE INFORMATION:
| Plant Difficulty |
- Medium |
| Light Requirement |
- Very Bright |
| Plant Type |
- Stem |
| An undemanding midground plant with an unique shaped leaf which requires low light and low maintenance. Ideal for beginners.
MORE INFORMATION:
| Plant Difficulty |
- Easy |
| Light Requirement |
- Medium |
| Plant Type |
- Rhizome |
On rock 5 X 5 cm - 1 unit |
| Content | The river buttercup from Australia, Ranunculus inundatus, is also sold with the label "Ranunculus papulentus". It is a true eye-catcher with its unique palmate fresh green leaves and its creeping growth habit. To live up to its full potential, this Ranunculus needs lots of light to prevent it from forming too long leaf stalks. Ranunculus inundatus can also be cultivated as bog plant in shallow water or wet soil. Under good conditions it will form its small yellow flowers then.
Ranunculus inundatus, or river buttercup, is an amphibic plant originating from south-eastern Australia. There it grows on wet mud or in the waters of ponds and rivers. Ranunculus (buttercup) species are found in many wetlands all over the world, however, R. inundatus is one of the few that grow submersed, too.
Ranunculus papulentus, another Australian buttercup species, and closely related to R. inundatus, is also said to be imported as aquarium plant. However, those plants named R. papulentus in trade do not differ at all from those hitherto identified as R. inundatus. Especially their emersed forms correspond much better to the descriptions and illustrations of R. inundatus than those of R. papulentus (e.g. Flora of New South Wales).
Much like Hydrocotyle and Marsilea species, R. inundatus forms sprouts, either in the substrate or creeping along the substrate surface, on whose nodes the upright leaf stalks and the roots are located. The palmate leaf blades with their forked pinna are characteristic.
To grow to its full potential, R. inundatus needs lots of light. Under low light, it forms long leaf stalks, which gives it a much less attractive overall look. Like most plants requiring strong light, the river buttercup needs around 30 mg/l of CO2 and ample fertilisation. If you keep these things in mind, R. inundatus will develop into a beautiful and attractive plant.
Emersed cultivation is rather easy on wet substrates like loam, and during the warm season it may be kept out of doors, e.g. on the edge of a pond or in containers. Then the plant sprouts small yellow buttercup flowers on upright shoots.
Even though R. inundatus needs quite some time to adapt to new surroundings it picks up growth once it has done so. Then it produces a great number of low-growing lateral shoots that can cover the entire foreground very quickly. It is not a very decorative plant if allowed to grow in crowded conditions. However, R. inundatus looks beautiful when combined with other foreground plants or bordering on sandy, unplanted areas.
| Common names |
River Buttercup |
| Misapplied names |
Ranunculus papulentus |
| Complete botanical name |
Ranúnculus inundátus R.Br. ex DC. |
| Family |
Ranunculaceae |
| Genus |
Ranunculus |
| Difficulty |
medium |
| Usage |
Midground, Foreground, group |
| Growth |
fast |
| pH value |
5 - 7 |
| Temperature tolerance |
10 - 30°C |
| Carbonate hardness |
0 - 14°dKH |
| General hardness |
0 - 30°dGH |
| Propagation |
Runners, Splitting, cutting off daughter plants |
| Can grow emersed? |
yes |
|
|
| A very special rarity, belonging to the diverse family of the Filmy Ferns. This tiny, moss-like fern was found in southwestern India on rocks along a stream. It is not yet identified with certainty and likely belongs to the species Crepidomanes malabaricum. In its natural habitat it is flooded during the rainy period only, however it can be grown permanently submerged in aquariums. This fern has tender, dark green, transparent leaves on a thin, creeping rhizome.
It is recommendable to fix Crepidomanes cf. malabaricum on stone or wood, you may also leave the plant on the pad and place it in the aquarium foreground. This fern grows very slowly, forming a carpet by and by. It is rootless but develops dark, hair-like rhizoids on the rhizome which help it adhere to the substrate. This Crepidomanes doesn't need much light, but a good CO2 and nutrient supply, soft to medium hard water and a good water current are beneficial.
Crepidomanes cf. malabaricum is a great enrichment for the aquascaping and looks particularly good in small-scale, delicate layouts, for example on vertical structures of the hardscape. Because of its extremely slow growth, one should pay attention to keep it from overrunning by other plants such as faster growing mosses. | Elatine Triandra Live Aquarium Plant pictures shown are of Submersed Grown Plants in Aquariums under Optimum Plant Growing Conditions.Elatine Triandra Live Aquarium Plant are grown in our farms in Immersed or Submersed Conditions depending on variety. Hence, Elatine Triandra Live Aquarium Plant Leaf Structures may vary from that shown in pictures. When Elatine Triandra Live Aquarium Plant are grown submersed in aquariums under Optimum Growing Conditions as required by the Plant (Light, Co2 and Nutrients) they will get the appearance as shown in pictures. You will get a packet is fully sealed without oxygen and it is safe to travel long distances for 5-7 days.
| Native to Central and South America, Echinodorus grisebachii or popularly called Amazon sword plant is cultivated in freshwater bodies like ponds, lakes and even aquariums. Aquarists swear by the multifarious uses of Echinodorus grisebachii in aquariums. Depending on the growth conditions, this plant can attain a minimum height of 18 to 20 inches or even more. Aquarium hobbyists have used this versatile aquatic plant in many ways inside the aquarium; whether it is used as a background plant or mid-ground plant as a focal centerpiece, Echinodorus grisebachii works like a charm either way. Echinodorus grisebachii has relatively low demands for optimum growth inside the aquarium. It demands at least 3 to 4 inches of the substrate layer to accommodate its large roots.
Appearance: Echinodorus grisebachii can attain a growth of 16 to 20 inches or more depending on the optimum growth conditions it is subjected to. It has large leaves that impart a beautiful contrast to its smaller counterparts. The leaves of Echinodorus grisebachii have a bright green coloration and new leaves may have a reddish or bronzish color. The leaves about 50 cm long and are submerged inside an aquarium. This plant often bears small white flowers with flat triangular petals. The leaf blades are lanceolate in shape.
Ideal water temperature conditions: Echinodorus grisebachii prefers a warm tropical climate with temperatures ranging between 22 and 28 degrees Celsius.
Water pH conditions: It tolerates both soft and hard water and a wide range of pH levels between 6 and 8.
Ideal lighting conditions: Echinodorus grisebachii prefers moderate lighting for optimum growth. In low lighting, the plant will grow at a very slow rate and fail to develop its characteristic large root system.
Uses and advantages:
1) Aquascaping – Echinodorus grisebachii is best suited as a background plant in large aquariums. However, some aquarists also use this plant in the midground as a centerpiece. The rich green hue and large leaves are in perfect contrast to smaller leaves of other plant species.
2) The large foliage of this aquatic plant is a perfect breeding place for spawning fishes like angelfish. They also provide hideouts for small fishes and fry.
3) The large leaves cleverly conceal unsightly aquarium equipment in the tank such as heaters, cords, filter tubes, thermostats etc., thereby increasing the aesthetics of aquarium.
Did you know?
Cutting off the top part of the stem and replanting it into the nutrient rich substrate can easily propagate Echinodorus grisebachii. Soon, several plantlets grow that can be removed once roots appear. Over a period of time, they can produce many offsprings. | Aquarium plant from tissue culture in closed cup.
This miniature version of the well-known Alternanthera is characterized by compact growth and a slower growth rate. It is particularly suitable for small aquariums or as a foreground plant in larger aquascapes. By careful trimming, it is possible to create a dense, red violet carpet of approximately 5 to 10 cm height. High light intensity and addition of CO2 improves the plants growth and overall appearance.
| Synonyms |
Alternanthera reineckii ''rosaefolia minor'' |
| Complete botanical name |
Alternanthéra reinéckii Briq. |
| Family |
Amaranthaceae |
| Genus |
Alternanthera |
| Difficulty |
medium |
| Colour |
red brown, crimson, reddish |
| Usage |
Accent (red), Midground, Nano tanks, Street (Dutch style), Foreground, group |
| Aquascaping |
well-branched, bushy, very colourful plant for accents |
| Height |
5 - 30cm |
| Width |
5 - 10cm |
| Growth |
medium |
| pH value |
5 - 7 |
| Temperature tolerance |
4 - 30°C |
| Carbonate hardness |
0 - 14°dKH |
| General hardness |
0 - 30°dGH |
| Propagation |
Cuttings, Splitting, cutting off daughter plants |
| Anubias barteri var. glabra is a medium-sized Anubias that comes from rainforest streams in West Africa. There are several different forms of the variety glabra with more or less elliptic to lanceolate leaves. It is also sold under the names Anubias minima and Anubias "Kruising".
The variety glabra is as as undemanding and robust as many other Anubias forms. It grows well as epiphyte on the hardscape as well as fixed to the substrate (don't bury the rhizome!). Its narrow, lanceolate leaves are an interesting contrast to other, rather broad-leaved Anubias forms.
Anubias barteri var. glabra is widely spread in West Africa, from Guinea to Gabun. The plant forms dense populations on river banks and rocks in and on forest rivulets, where they often share the same habitat with Bolbitis heudelotii and Crinum natans.
| Synonyms |
Anubias lanceolata N. E. Brown, Anubias minima Chevalier |
| Trader names |
Anubias "Kruising" |
| Complete botanical name |
Anúbias bárteri var. glábra N.E. Brown |
| Family |
Araceae |
| Genus |
Anubias |
| Difficulty |
very easy |
| Colour |
medium green, dark green |
| Usage |
Epiphyte (growing on hardscape), Cichlid proof plant, Midground, Nano tanks, Foreground, group |
| Height |
10 - 20cm |
| Width |
10 - 30cm |
| Growth |
very slow |
| pH value |
5 - 8 |
| Temperature tolerance |
12 - 30°C |
| Carbonate hardness |
0 - 15°dKH |
| General hardness |
0 - 30°dGH |
| Propagation |
Rhizomteilung, Splitting, cutting off daughter plants |
| Can grow emersed? |
yes |
|
There are no reviews yet.