Price | ₹1,199.00 Original price was: ₹1,199.00.₹600.00Current price is: ₹600.00. | ₹999.00 Original price was: ₹999.00.₹500.00Current price is: ₹500.00. | ₹3,999.00 Original price was: ₹3,999.00.₹2,300.00Current price is: ₹2,300.00. | ₹1,499.00 Original price was: ₹1,499.00.₹700.00Current price is: ₹700.00. | ₹2,199.00 Original price was: ₹2,199.00.₹1,800.00Current price is: ₹1,800.00. | ₹999.00 Original price was: ₹999.00.₹500.00Current price is: ₹500.00. |
Content |
AF Carbon Boost
A professional supplement of easily digestible carbon intended for aquarium plants. It is a perfect fertilizer for everyday use.
It can be used both as the main method of carbon supplementation and as an additive supporting an existing CO2 installation. Carbon is the base of all organic compounds, it is essential for the intensive growth of plants. Too low carbon content in water leads to the inhibition of plant growth and development.
Regular use of AF Carbon Boost provides plants with the right amount of carbon in its most absorbable form, thus effectively replenishing its deficiencies. AF Carbon Boost helps keep the aquarium in good condition and provide attractive, healthy looking plants.
Due to pH stabilizing capabilities, It is extremely helpful in combating algae. Specifically recommended for heavily planted aquariums.
HOW TO USE:
In the aquarium: for small amount of plants: 1 ml per 100 liters of water daily;
for average amount of plants: 1 ml per 50 liters of water daily;
for large amount of plants: 1 ml for 25 l water daily.
Only for aquatic purposes. Protect from sunlight. Keep at room temperature in a tightly closed container, keep out of reach of children.
|
AQUAFOREST Iron Boost | 200ml
Professional, easily absorbable chelated iron supplement for aquatic plants
AQUAFOREST Iron Boost is a professional easily absorbable iron fertilizer for aquatic plants. Iron takes part in a variety of metabolic processes, and above all, it plays an important role in the synthesis of chlorophyll – green pigment. Its presence conditions efficiency of photosynthesis. Iron absorption is dependent on the macronutrient and micronutrient content, as well as the pH and the iron itself. A common problem in aquariums is iron deficiency because its form may not be absorbed by plants. Iron deficiency leads to disappearance of chlorophyll, and consequently development of chlorosis manifesting as leaf yellowing and necrosis. Optimal concentration of iron in aquarium water should be 0.1-1 mg/l. AF Iron Boost contains a concentrated dose of easily absorbable Fe2+ iron chelate for aquarium plants.
HOW TO USE:
- 1ml AF Iron Boost per 100l water one time per week.
- 1 ml of AF Iron Boost dissolved in 100 liters of water increases the iron level by 0.04 mg/l.
- Fertilizer application should be continued until satisfactory results are achieved.
Recommended : parallel use with AF Micro and AF Macro.
WARNING
- Absorbents such as zeolite and/or carbon may reduce effectiveness of the formula.
- Only for aquatic purposes.
- Protect from sunlight.
- Keep at room temperature in a tightly closed container, keep out of reach of children.
| AQUAFOREST NATURAL SUBSTRATE | 10L
Nutrient rich, peat & clay based substrate base for aquascapes & planted aquariums.
AQUAFOREST Natural Substrate is a nutrient rich, peat and clay based substrate base for aquascapes and planted aquariums. Readily available micronutrients and plant food within it create a fertile, nature-like environment, ideal for long-time plant support and growth. AF Natural Substrate is well suited for the development of a healthy root system, and to help aquatic plants thrive. The peat and clay natural Cation Exchange Capacity (CEC) will also absorb any excess nutrients from the water, and either make them available through the roots, or release them back into the water once it becomes depleted. Features and benefits: The carefully selected peat creates excellent conditions for the root system, and supplies plants with all the necessary minerals and trace elements. Clay improves the texture, and acts as the base, achieving excellent consistency. Similarly to peat – clay acts as a natural layer for storing excess nutrients, and maintaining biological balance in the tank. Micronutrient contents have been supplemented under laboratory supervision to make sure that aquatic plants have an abundance of trace elements, while the chemical balance of the tank stays in check.
WARNING:
AF Natural Substrate is rich in micro-nutrients, so for the first three months Aquaforest do not recommend the use of fertilizers containing micro-nutrients, unless the plants show visible signs of deficiency.
HOW TO USE:
- Spread the substrate on the bottom of the tank and compact it to achieve approx. 2-2.5 cm thick layer.
- Cover with about 3cm of gravel or sand.
- Gently fill aquarium with about 15 cm of water. In order to avoid disturbing the substrate, we suggest placing a plate or dish on the bottom, and directing the stream of water on to it.
- Place the plants in the substrate.
- Fill the aquarium with water.
10 L of AF Natural Substrate should be sufficient for a 200 L aquarium with a 100 cm x 40 cm bottom. Substrate can lower and stabilize the pH of the water, therefore it is recommended to use a dedicated test or probe. | AF Shrimp GH+ 250ml
AF Shrimp GH+ is a Professional preparation for mineralizing RO water, designed especially for breeding shrimps, especially Bee and Cristal species. Thanks to the use of natural ingredients, it enriches the water with all the minerals necessary for the aquarium inhabitants and guarantees the perfect water parameters. The unique formula was enriched with iron. It supplements the water with calcium, magnesium and potassium in the perfect ratio. It prevents inadequate levels of the elements that could lead to serious moulting and reproduction problems of shrimps. The liquid form provides easy and comfortable use. The perfect selection of ingredients leaves the water perfectly clear, without haziness or white tint. It guarantees healthy growth of shrimps and the proper moulting. Proper water mineralization allows the shrimp to take all the necessary minerals directly from the water, including calcium necessary for building and hardening the shell.
HOW DOES IT WORK?
- The product increases the total hardness (GH), leaving the carbonate hardness unchanged (KH)
- Mineralizes RO, deionized and distilled water
- Provides essential minerals
- Guarantees perfect water parameters
HOW TO USE:
- For GH 5 – 3 ml/5 l of water
- Mix with water outside the aquarium
- After mixing, the water is ready to use immediately
IMPORTANT
Due to the high content of minerals, sediment may appear in the bottom of the bottle, this is completely natural and does not indicate a product defect. The sediment also doesn’t affect the clarity of the water using in the aquarium. | PRODUCT INFO:
A specialist ion exchange resin designed for use in freshwater aquariums. Dedicated primarily to heavily stocked aquariums, struggling with the problem of elevated nitrates. Dedicated for the chemical absorption of nitrogen compounds dissolved in water. It works selectively, effectively absorbing nitrates from water without affecting the level of minerals necessary for aquatics life. Removes harmful compounds from the water, reduces the frequency of water changes and prevents the growth of algae.
HOW DOES IT WORK?
- Absorbs harmful nitrogen compounds
- Clarifies the water
- Supports battling algae
- Doesn’t affect essential minerals
HOW TO USE:
125 ml is enough for purifying 400 liters of water. Place the resin in a fine-mesh filter bag and then place it in the filter basket with a constant flow of water. Dark brown discoloration of the product indicates it’s wear . The packet should then be replaced or regenerated. Regeneration can be done with chlorine-containing bleach. Regeneration should be carried out in a 50% bleach solution for approx. 6 hours. After that, rinse the resin thoroughly and leave it in clean water for about 24 hours. |
AQUAFOREST PO4 BOOST | 200ML
Professional & highly efficient phosphorus supplement for aquatic plants
AQUAFOREST PO4 Boost is a professional easily absorbable phosphorus fertilizer for aquatic plants. Phosphorus is a particularly important element for plants. A component of many types of proteins and enzymes, it also helps to build DNA. It is the main battery and energy conveyor in processes occurring within the cells. Phosphorus deficiencies are manifested by hindered plant growth and development, as well as leaf discoloration. The appropriate level of phosphates in the plant aquarium should be 0.5-1.5 mg/l. AF PO4 Boost is a formula which ensures the correct level of phosphate content in the aquarium.
HOW TO USE:
10 ml AF PO4 Boost dissolved in 100 liters of water raises the phosphate level by 0.4 mg / l.
Recommended : parallel use with AF Micro, AF N Boost, and AF K Boost.
WARNING :
- Absorbents such as zeolite and/or carbon may reduce effectiveness of the formula.
- The phosphate level should be under control.
- Its excess may result in growth of algae, especially the red algae.
- Only for aquatic purposes.
- Protect from sunlight.
- Keep at room temperature in a tightly closed container, keep out of reach of children.
|
There are no reviews yet.