| Content | AF N Boost (200ml)
Professional easily absorbable nitrogen fertilizer for aquatic plants. Nitrogen is one of the most important macronutrients necessary for plants. The presence of nitrogen influences the growth of the plant, its propagation, and the green coloration of leaves. Proper supplementation of nitrogen is essential as both deficiency and excess may be detrimental to plants. Nitrogen deficiency causes growth inhibition, chlorosis and yellowing of the leaves, and further browning. The excess, on the other hand, is manifested by excessive growth, dark green leaves, while the plant is very delicate and less resistant to mechanical damage. The appropriate level of nitrate in the plant aquarium should be 10-20 mg/l. Nitrogen is absorbed by plants mainly in the form of nitrate and ammonium. AF N Boost contains mineral nitrogen forms that are well absorbed by aquatic plants.
HOW TO USE:
10 ml of AF N Boost dissolved in 100 l of water raises the nitrate level by 9.5 mg/l. Recommended parallel use with AF Micro, AF PO4 Boost, and AF K Boost. Do not use it with other nitrogen-containing formulas due to the risk of plant overgrowth and algae bloom.
1 ml in 10 l of aquarium water will raise levels:
NO3 Nitrate 9,5 mg/l (ppm)
| PRODUCT INFO:
A specialist ion exchange resin designed for use in freshwater aquariums. Dedicated primarily to heavily stocked aquariums, struggling with the problem of elevated nitrates. Dedicated for the chemical absorption of nitrogen compounds dissolved in water. It works selectively, effectively absorbing nitrates from water without affecting the level of minerals necessary for aquatics life. Removes harmful compounds from the water, reduces the frequency of water changes and prevents the growth of algae.
HOW DOES IT WORK?
- Absorbs harmful nitrogen compounds
- Clarifies the water
- Supports battling algae
- Doesn’t affect essential minerals
HOW TO USE:
125 ml is enough for purifying 400 liters of water. Place the resin in a fine-mesh filter bag and then place it in the filter basket with a constant flow of water. Dark brown discoloration of the product indicates it’s wear . The packet should then be replaced or regenerated. Regeneration can be done with chlorine-containing bleach. Regeneration should be carried out in a 50% bleach solution for approx. 6 hours. After that, rinse the resin thoroughly and leave it in clean water for about 24 hours. |
AQUAFOREST PO4 BOOST | 200ML
Professional & highly efficient phosphorus supplement for aquatic plants
AQUAFOREST PO4 Boost is a professional easily absorbable phosphorus fertilizer for aquatic plants. Phosphorus is a particularly important element for plants. A component of many types of proteins and enzymes, it also helps to build DNA. It is the main battery and energy conveyor in processes occurring within the cells. Phosphorus deficiencies are manifested by hindered plant growth and development, as well as leaf discoloration. The appropriate level of phosphates in the plant aquarium should be 0.5-1.5 mg/l. AF PO4 Boost is a formula which ensures the correct level of phosphate content in the aquarium.
HOW TO USE:
10 ml AF PO4 Boost dissolved in 100 liters of water raises the phosphate level by 0.4 mg / l.
Recommended : parallel use with AF Micro, AF N Boost, and AF K Boost.
WARNING :
- Absorbents such as zeolite and/or carbon may reduce effectiveness of the formula.
- The phosphate level should be under control.
- Its excess may result in growth of algae, especially the red algae.
- Only for aquatic purposes.
- Protect from sunlight.
- Keep at room temperature in a tightly closed container, keep out of reach of children.
| 2Hr Aquarist APT Estimative Index
With the 2HR AQUARIST APT ESTIMATIVE INDEX, the famous nutrient dosing approach pioneered by Tom Barr is now available in a ready-to-use concentrate that removes the guesswork from trying to recreate this powerful and sometimes elusive formula. The key here is the concentrate of this formula. Just 5ML per 100 liters adds the following nutrients
-
- 6 PPM Nitrogen
- 1.5 PPM Phosphorus
- 6 PPM Potassium
- 0.16 PPM Iron
And additional amount of
-
- Boron
- Copper
- Manganese
- Magnesium
- Molybdenum & Zinc
Dosage: Dose 5ml per 100L 3 times per week or 2ml per 100L daily
The 2Hr Aquarist All-In-One Fertiliser. Richer Colors, Less Algae. Faster Results.
With the 2HR Aquarist APT EI, the famous nutrient dosing approach pioneered by Tom Barr is now available in a ready-to-use concentrate that removes the guesswork from trying to recreate this powerful and sometimes elusive formula. | ADA Super 4 Aquarium Additive is now called Super Pour.
The pack contains ADA substrate additives in individual packets.
It is recommended to sprinkle the ADA Super 4 on a glass base before filling anything in order to promote the work of microorganisms and enhance the inefficiency of soil or decorative sand.
As the substrate cannot make a fresh start right after the setup, it is important to prepare the substrate in a nearly perfect condition at the time of the initial aquarium setup.
ADA Super 4 (Substrate Additives)
To promote the work of microorganisms, it is advised to sprinkle the following under the soil
Bacter 100
Has more than 100 kinds of substrate bacteria in a dormant state.
Sprinkling on the base substrate can make an ideal substrate environment.
It can suppress the growth of green algae. (By applying a bit of it to the affected portion)
Clear Super
A substrate additive made from activated carbon and organic acid.
Clear Super helps the growth of micro organisms.
Sprinkling on the base substrate, promotes the growth of micro organisms in the substrate and stabilizes the environment.
Tourmaline BC
Has fine bamboo charcoal, giving it the ability to absorb organic pollutant substances.
Add some over the substrate during the initial set-up and it will help to improve the substrate environment.
Features
- Improves biological filtration and increases water clarity.
- Suppress the growth of green algae
- Contains more than 100 kinds of substrate bacteria
- Helps the growth of micro organisms
- Absorb organic pollutant substances
- Prevents the substrate from becoming anaerobic
Note: *Do not mix in water as written on the package.
*Do not use in marine aquariums. | AF Remineralizer 250ml
Liquid mineralizer for RO water. It enriches the water with the minerals necessary for plants and aquarium inhabitants. Suitable for mineralizing RO, deionized, and distilled water. The complex formula contains easily absorbable calcium and magnesium, increasing the general hardness and carbonate hardness in the desirable ratio of 2:1. It contains all the minerals needed to keep freshwater fish and plants in a perfect condition. Maintains the correct ratio of calcium and magnesium. Helps preventing diseases caused by too low content of mineral ions in the water, protects fish against stress and osmotic shock. The liquid formula ensures easy use and instantly prepares water to use in the aquarium.
HOW DOES IT WORK?
- Instantly mineralizes water
- Supports plant growth
- Sets perfect GH to KH ratio
HOW TO USE:
1 ml per 3 liters of water and raises KH: 2, GH: 4. Shake well before use. Mix with water outside the aquarium. |
There are no reviews yet.